About Us Specifications Photo Gallery Videos Dealers
Design/Construction
Pricing Contact Home

Life Time WarrantySpecifications

Standard Features

  • L.O.A. 19'3"
  • Beam 8'
  • Weight/Dry 970 lb.
  • Capacity 1750 lb. / 8 person
  • Fuel Capacity 27 gallons
  • Draft 7.5"
  • Running Depth 4.5"
  • Full length tunnel hull, fully cored, using S-glass/Kevlar/carbon, 100% vinylester resin (no blends)
  • Lifetime warranty against hull punctures, all backing plates aluminum construction, aluminum reinforced transom
  • Boat completely made using 100% vacuum resin infusion technology, NMMA & USCG
  • Vinyl rub rails, console stainless steel grab rail, heavy duty windshield
  • Hydraulic jack plate with 6" lift, U-FLEX hydraulic steering, 12" Lenco trim tabs
  • Tilt steering with stainless steel steering wheel
  • Automatic bilge pump with switch
  • Renewaire circulating 70 qt. bait-well with overflow, light and clear acrylic lid
  • Renewaire circulating 104 qt. live-well with overflow and light
  • Single raw water pick-up manifold with shut-off valve
  • Flush mounted hardware & flush mounted rod holders (2)
  • ln-deck cast net locker, large fore and aft casting decks
  • Wide 12" gunwales with under gunwale rod storage for 8 rods
  • Red LED cockpit lighting, LED navigational lights, console interior storage area lighting
  • Dual battery switch, switch panel with push button re-set breakers
  • Built in oversize runs for wiring
  • Custom wiring harness with Deutsch DT sealed connectors
  • Exclusive energy absorbing cockpit flooring
  • Self bailing cockpit with cockpit area of 46 sq.ft., 2 tunnel drains
  • Combination helm seat with backrest, forward console seating with storage
  • Bow anchor locker, flush mounted compass, electric horn, 2 fire extinguishers
  • 12 cu.ft. forward dry storage, 8.5 cu.ft. under seat aft storage

Optional Features

  • Pre-rigged trolling motor includes AC battery charger, deck plug, battery trays, wiring & aluminum deck backing plate
  • Poling platform with flush mount pole clips
  • Trim tab console indicators
  • Forward re-circulating bait-well with light
  • Oxygenation bait-well/live-well system
  • Commercial duty rub-rail
  • Flush mounted rod holders (2)
  • Two-tone gel coat on the hull
  • Team RIVERSEDGE hull graphics
  • Carbon transom (50 lb. weight reduction)
  • Epoxy/carbon hull and deck (150 lb. weight reduction)

Rivers Edge

Aft Casting Deck

Bow Anchor Locker

Aft Live Well

Bench Seat Storage

RiversEdge Boats
200 Dale Street • Edgewater, FL • 386-235-5343 • riversedgeboats@gmail.com

 

Website Design by Lisa Day Burbaugh, NSBWebEffects.com